موجودی و قیمت های کاملا به روز

- وضعیت انبار: ناموجود
- مدل: شارژر همه کاره Imax X80 AC
شارژر اورجینال شرکت IMAX با هولوگرام لیزری شرکت .
برای شارژ و دیس شارژ باطری های LiPo و LiFe و Lion قابلیت شارژ و بالانس باطری های 2 تا 6 سل
و همچنین شارژ باطری های NiCd و NiMh از 1 تا 18 سل
قابلیت کار با برق شهری 110 تا 240 ولت AC و همچنین برق 11 تا 18 ولت DC
قدرت شارژ 80 وات و دیس شارژ 10 وات با قابلیت شارژ باطری های تا ظرفیت 5000 میلی آمپر
این دستگاه نهتنها شارژر، بلکه بهعنوان تراز کننده (بالانس) و تخلیه شارژر کننده( دیس شارژر ) نیز شناخته میشود. این دستگاه را میتوان برای طیف وسیعی از باتریهای لیتیومی – پلیمری مورداستفاده قرار داد. همچنین انواع اتصالدهنده را میتوان با این محصول بکار برد. وجود تراز کننده داخلی لیتیومی مستقل برای تراز نگاهداشتن باتری در حین شارژر از دیگر مشخصات این محصول است. در حین فرآیند تخلیه شارژر باتری، هر تکسلول باتری بهصورت مجزا تراز شده و چنانچه ولتاژ مربوط به هر سلول، غیرعادی باشد، فرآیند تخلیه شارژر بهصورت خودکار متوقفشده و صدای خطابه گوش میرسد.
برای شارژر سریع و یا نگهداری باتری میتوانید از گزینههای بسیار کارآمد این دستگاه – Fast Charging – استفاده کنید. با استفاده از گزینه FAST میتواند باتری لیتیومی – پلیمری را در مدت بسیار کوتاهی شارژر کنید. برای نگهداشتن باتری برای مدت طولانی و بدون استفاده، میتوانید از گزینه Storage بهره ببرید. در این حالت باتری تا مقدار تقریباً 50 درصد شارژر میشود.
سایت سازنده : http://imaxrc.com/X80-AC.html
مشخصات فنی :
Operating voltage range: AC 100-240V, DC 11-18V
Charge power: Max 80Watts
Discharge power: Max 10Watts
Charge current range: 0.1-6.0A
Discharge current range: 0.1-2.0A
Lilo/Lipo/Life battery count:1-6 Series
NiCd/NiMH battery count: 1-16 Cells
Pb battery voltage: 2 to 24V
USB charge: 5V/2.1A
Dimension: 148*140*48mm
Weight: 0.55kg
Syetem: iM.OS V2.15
Operating Temperature: 0-50℃
iMaxRC X80AC Charger Includes
iMaxRC X80 AC Balance Charger*1
AC Input Cord*1, DC Input Cord*1
Output Cord*1
Instruction manual*1
iMaxRC X80AC Charger Introduction
X80 AC Balance Charger is the traditional balance charger with LCD display and buttons. AC/DC function, 80Watts, 6A charge current. The best choice for low budget
iMaxRC X80AC Charger Connections
1. Connect the charger to its power source, using either the AC power cord or the DC power cord provided. When connected to power, the charger will make a single audible tone.
When connecting to a DC power source, make sure to observe connect polarity-red to positive and black to negative. Do not connect both power inputs to the charger at the same time!
2. Plug the output power adapter cord into the output power ports of the charger, making sure to observe correct polarity (red to red and black to black).
3. Plug your battery into the output power adapter cord. If you’re charging a LiPo battery, plug its balance connector into the matching balance port on the charger, too.
Depending on the power connector on your battery, you may need to use an adapter or change the connector to match. In addition, if your LiPo battery does not feature an XH balance connector, an adapter board can be used.