دسته بندی کالاها

آمار بازدید
 امروز  14
 این هفته  3054
 این ماه  32975
 امسال  368297
 مجموع  607645
افراد آنلاین18

فلایت کنترل Flyduino KISS FC ریسینگ 32 بیتی نسخه بتا فلایت مخصوص FPV Racing

فلایت کنترل Flyduino KISS FC ریسینگ 32 بیتی نسخه بتا فلایت مخصوص FPV Racing
مدل محصول: Flyduino Kiss Flight Control Fpv Racing v1.03
موجودی: در انبار
قیمت: 390,000تومان

فلایت کنترل Flyduino KISS FC ریسینگ 32 بیتی نسخه بتا فلایت مخصوص FPV Racing یکی از بهترین فلایت کنترلهای پرنده های ریسینگ در جهان میباشد که در سال 2016 برنده عنوان بهترین فلایت کنترل جهان شد.

این فلایت کنترلر 32 بیتی و بسیار قوی دارای الگوریتم پروازی بسیار دقیقی میباشد که باعث میشود کنترل پرنده در سرعتهای خیلی بالا بهتر و دقیقتر انجام پذیرد و پرنده سرعت بالاتری پیدا کند.

برای ست آپ این فلایت کنترلر میتوانید از برنامه های معروفی مثل بتا فلایت یا کلین فلایت استفاده نمایید.

استفاده از این فلایت کنترلر تنها به افراد حرفه ای توصیه میشود که قبلا با فلایت کنترلهای ساده تری مثل CC3D و NAZE32 کار کرده و پرواز کرده اند.

FLYDUINO KISS FC 32bit Flight Controller V1.03 for Racing Drones

KISS FC is a F3 flight controller designed by Flyduino for Mini Quad FPV Racing

Rank #1 IN Top 5 Best Flight Controllers 2016

KISS FLIGHT CONTROLLER

The KISS FC (flight controller) from Flyduino is an amazing little board for any small sized quadcopter. I’m going to start off by saying that the KISS FC doesn’t have as many features as some of the other popular flight controllers out there, but that isn’t necessarily a bad thing. Because of it’s lack of features, you’re able to navigate through the user interface for the first time without a lot of confusion, and there’s no random or useless settings laying around that take up space.

Other than the basic configuration settings and monitoring tools, the only other thing that you’ll find in the GUI (graphical user interface) is the PID settings for tuning your drone. In the PID section, you can choose to tune every part of the PID loop yourself, or if all of this is new to you, simply select one of the user presets uploaded from hundreds of real pilots who already know what they’re doing.

All of this is great, but none of it matters if the flight controller doesn’t fly well. The good news is, it flies great! Out of all the flight controllers out there, this one is my favorite, and it’s widely known as the best flight controller you can buy (Even if it doesn’t have every single feature known to man

You just need to choose your Airframe in the GUI and are able to fly (at least with KISS ESC), otherwise you can download presets of well knowen Pilots for given configurations and of course can tweak the PID yourself over the GUI.
The software setup side is reduced as far we can, many things are allready taken in to account for you, if you bring some solid soldering skills you should be fine, no serial or aditional in/output configurations are needed.
 
A nice feature is the inbuild telemetry, in combination with our 32bit ESC line its easy to set up. with it you can have the lipo mah consumption, the motors rpm and many more things on your OSD.
 
 
Weight: 4.6g
Mounting Holes: 3x3cm pattern, with 3.2mm holes (widely compatible)
Voltage: 2-6S (max 5s recommended)
 
 
Package Included:
 
1pcs Kiss Flight Control
 


As we felt the need for a modern more simplified 32bit Flightcontroller, we made the KISS FC, which includes a complete own Flight Controll Firmware development who get rid of some old ballast, this took some time, but the result is very pleasing.
The Idea was to simplify some things and due to intensive long term testings of some pretty good Pilots we where able to optimize the code to a  point where you hopefully get your quad in the air quite quick.
Normally you just need to choose your Airframe in the GUI and are able to fly (at least with KISS ESC), otherwise you can download presets of well knowen Pilots for given configurations and of course can tweak the PID yourself over the GUI.
The software setup side is reduced as far we can, many things are allready taken in to account for you, if you bring some solid soldering skills you should be able to build your quad pretty quick.
A new feature is also the inbuild telemetry, in combination with our 32bit ESC line its possible to show the live telemetry data via OSD on your FPV live feed or in the KISS FC GUI
This way you get usefull informations like the Voltage of your battery, current consumption, ESC temperature and motor RPM.


Supported copter types:
- Tri
- Quad +/x
- Hexa +/x

Supported RX types:
- PPM Sum
- Spektrum Sat. (serial / DSM2 & DSMX)
- Futaba / Taranis SBUS
- Jeti ExBus
- Graupner SumD / SumO
- MultiPlex
- classic RX with single channel output


- STM32F303CCT6
- MPU6050

Weight: 4.6g
Mounting Holes: 3x3cm pattern, with 3.2mm holes (widely compatible)
Voltage: 2-6S

Driver for STM32F303CCT6
Normally you dont need to download any driver for the USB support.
Windows 7 8 and 10 care for this on their own after you connected the device.

The connection diagramm / Pinout you find in KISS-FC GUI
 

 

نظر بدهید

نام شما:


نظر شما: توجه : HTML ترجمه نمی شود!

رتبه: بد           خوب

کد امنیتی را در کادر زیر وارد نمایید:



پشتیبانی : تم مسترز
تمامی حقوق برای فروشگاه رباتیک اهواز هابی بزرگترین مرجع قطعات مولتی روتور محفوظ است © 1397